The Saleen Forums at soec.org

The Saleen Forums at soec.org (https://saleenforums.soec.org/index.php)
-   1999-2004 Saleen Mustang (https://saleenforums.soec.org/forumdisplay.php?f=62)
-   -   99-04 Boost/Temp Gauges?? (https://saleenforums.soec.org/showthread.php?t=23217)

02saleen 06-04-2021 04:13 PM

99-04 Boost/Temp Gauges??
 
My 02 was a naturally aspirated car to which I added a series 2 supercharger years ago, but never put any boost/temp gauges. I was able to buy some original Saleen boost/temp gauges this morning on ebay.

To try to install them as close to the placement that Saleen would have used as well. I was wondering if some of you could share how far back the cluster is form the center climate control vents. Some pictures along with measurements would be appreciated.

There is a chance that the shop that does the install will pick the same spot due to brackets or whatever might have been used to keep them in place, but I also tough I would ask on here too.


Thanks in advance

Talon4u2nv 06-20-2021 12:58 AM

Iím new here but I have a 99 I can try to measure for you if needed.

SD S281 06-21-2021 05:48 PM

If you are close to San Diego, you are more than welcome to come grab measurements and check it out in person.

02saleen 06-24-2021 05:28 PM

I'm about 3 hours north of SD and that's without traffic lol.

If you can send me pictures or post them on here I would appreciate it (no rush).

The install is on hold for now as the shop is still waiting on some suspension parts from Maximum Motorsports. It seems some have a decent backorder on them as some orders from April are still pending. I am trying to be patient and just take the car in once to have the suspension redone, front brake calipers, driver seat rewelded and now the gauges.

Talon4u2nv 07-08-2021 09:24 PM

Hereís some quick photos. Disregard my radio bezel. Previous owner bug card a lot on her and Iím the process of restoring her.

Talon4u2nv 07-08-2021 09:25 PM

99-04 Boost/Temp Gauges??
 
Hereís some of my 99. Working on restoring her so be easy on the previous owners painted radio bezel nightmare.
https://uploads.tapatalk-cdn.com/202...64ae902f63.jpg

https://uploads.tapatalk-cdn.com/202...2481203ad8.jpg
https://uploads.tapatalk-cdn.com/202...eb15a2383b.jpg
https://uploads.tapatalk-cdn.com/202...f881691604.jpg

02saleen 07-09-2021 12:57 PM

1 Attachment(s)
Thank you for providing the pictures

The one thing I can't seem to find and the shop that is looking to do the work had question on as well is the pressure sending unit for the boost.

In the install guide below they seem to connect it to the pressure sending unit which I canít seem to find on my series 2. I do notice that on the install guide they use a series IV. Does the Series 2 have the pressure sending unit in a different place? If it's in the same place it should be in the area I circled. I can order one from Saleen, but I also wanted to see where the Series 2 has it in case it is different than the series IV in the install guide.

https://www.soec.org/manuals/interio...ng/047-397.pdf

https://www.saleenperformance.com/products/047-590

Thanks in advance to everyone for your help/time

SaleenOne 07-12-2021 01:40 PM

1 Attachment(s)
Maybe this is the area they are talking about??


All times are GMT -4. The time now is 10:05 AM.